Today's RC cars have evolved and their marginal performance has improved. As a result, some drivers may find that conventional servos are not enough. The new product BSx4 Sone10 Grasper2 has been redesigned from the built-in brushless motor to improve torque and holding power. Grasper's greatest feature, "grasping the road" servo performance has been further enhanced. Even on the latest high-end machines, the Grasser 2 has enough holding power. (recommend for 1/10 category).
What is holding power
The holding force is the force that the servo shaft tries to hold a position. Grasper has meanings such as "grasping tightly" and "grasping firmly", and is a name that expresses the characteristics of this servo that firmly captures the road surface.
Torque increased by 150% compared to conventional models
The torque of the conventional BSx3-one10 Grasper was 10.8Kg-cm (at 7.4V), but with the new Grasper2, the torque has been improved to 16.0Kg-cm. This achieved about 150% increase compared to the conventional model. Torque increased by 150% compared to conventional models.
Specification:
- Torque: 16.0Kg-cm Speed: 0.09sec/60deg(@7.4V)
- Torque: 12.1Kg-cm Speed: 0.11sec/60deg(@6.0V)
- Dimensions: 40.5?26?21mm (Low Profile)
- Weight: 51.0g
- Operating voltage: 6.0~7.4V (Lipo,Life,Ni-MH)
- Brush-less motor
- Hard aluminum gear
- Dual bearings
- Hard servo gear shaft
- Aluminum top case
- Aluminum heat sink middle case
- Black cable
- Gold plated connector
- Serial Compatible
- HCS Compatible
Recommend category
- 1/10 EP on road, 1/10 EP Off road, 1/10 GP On road.
